User`s guide

Using the Local Terminal for Unit Setup and Management
BreezeNET PRO.11 Series
3-29
User’s Guide
3.7 Access Control Menu
Access Control functions enable the System Administrator or Installer to limit
access to Local Terminal Maintenance setup and configuration menus.
BreezeNET PRO.11 Series (SA-10)
Official Version: 4.4.1
Date: 26 May 1999 15:10:33
Access Control menu
===================
1 - Change Access Rights
2 - Change Installer Password
S - Show Current Access Right
Select option > 1
Figure 3-9. Access Control Menu
The Access Control menu includes the following options:
• Change Access Rights – This screen determines the level of access rights to
the BreezeNET PRO.11 unit’s setup and configuration menus. When the unit
is first installed, the default access right is Installer, and the default password is
“user”:
• User – The Local Terminal Management menus are read-only for a user
who does not possess the correct password. The ESSID and security
parameters are hidden by asterisks (*) at this level.
• Installer – The installer has access to configure all required parameters in
the system configuration menu, as well as some of the advanced settings.
Access is password-protected. After configuration, the installer should
change access rights to option (0), User. The installer can also change the
installer password (see next parameter).