User`s guide

Using the Local Terminal for Unit Setup and Management
User’s Guide
3-28
BreezeNET PRO.11 Series
8. Re-align the antennas until the maximum received signal strength is attained.
As you align the antennas, the RSSI (received signal strength indicator)
continually increases until it reaches a certain level after which the RSSI begins
to decrease. This is the maximum attainable RSSI level indicating optimum
receive antenna alignment.
9. Switch the functions of either side of the link (set the transmit unit to receive
and the receive unit to transmit) and repeat the procedure to check the link from
the opposite direction.
3.6.4 Event Log
• Display Event Log – The error messages that the unit displayed since the last
Load Full Factory Defaults reset or since the log was erased by Erase Event
Log. The Event log stores events in four levels of error notifications: MSG
(Message), WRN (Warning), ERR (Error), and FTL (Fatal).
• Erase Event Log – Erases the event log.
• Event Storage Policy – Defines severity policy for storage level of the event
log. There are four levels of storage policy:
0 – Store all events (beginning at message level).
1 – Store all events from warning level up.
2 – Store all events from error level up.
3 – Store fatal events only.
3.6.5 Display Neighboring AP’s
Displays neighboring AP’s on the same ESS for both the AP and the station units.