User`s guide

Using the Local Terminal for Unit Setup and Management
BreezeNET PRO.11 Series
3-17
User’s Guide
3.5.6 Maintenance
The Installer has access to modify the following parameter of the Maintenance menu:
• Auto Calibration – When the unit is started, it performs an internal self-test.
A part of this test is automatic calibration of the DC Offset and deviation
pattern. Auto Calibration is not supported in the “DE” models, and therefore,
must be disabled for “DE” units.
• Japan Call Sign – The Japan Call Sign is part of the Japanese standard,
defined according to local regulations. The Japanese Ministry of
Communications supplies an activation code for the units; this code is set in
the factory for each unit.
3.6 Site Survey Menu
BreezeNET PRO.11 Series (SA-10 DL)
Official Version: 4.4.1
Date: 26 May 1999 15:10:33
Site Survey menu
================
1 - System Counters
2 - Survey Software
3 - Event Log
4 - Display Neighboring AP’s
Select option >
Figure 3-4. Site Survey Menu
The Site Survey menu allows performing a site survey that helps you position your
units and align the antennas of the units, as well as perform troubleshooting.