User`s guide

Basic Installation
User’s Guide
2-6
BreezeNET PRO.11 Series
2.6.2 Access Point LEDs
Name Description Functionality
PWR power supply On – After successful power up
Off – Power off
INFR radio interference Off – No interference
Blinking – Interference Present
ETHR Ethernet activity On – Reception of data from Ethernet LAN that is
forwarded to WLAN (in reject unknown mode)
Off – No reception of data from Ethernet LAN that is
forwarded to WLAN
LOAD WLAN load
Number of associated
stations
no stations
1-8 stations
9-16 stations
17 or more stations
2.6.3 Verifying the Ethernet Connection
Once you have connected the unit to an Ethernet outlet, verify that the ETHR LED
on the front panel is blinking. The ETHR LED should blink whenever the unit
receives LAN traffic.
At the other end of the Ethernet link, verify that the LINK indicator is ON. On APs,
the LINK indicator is located on the attached hub port; on station adapters, the
LINK indicator is located on the NIC.