User`s guide

Basic Installation
BreezeNET PRO.11 Series
2-5
User’s Guide
2.6 Check Unit Functionality via the LED indicators
Verify that the unit is functioning correctly via the front panel LEDs. The following
tables describe the front panel LEDs for stations (SA-10, SA-40) and bridges (WB-
10), and for Access Points.
2.6.1 Station (SA-10, SA-40) and Bridge (WB-10) LEDs
Name Description Functionality
PWR Power supply On – After successful power up
Off – Power off
WLNK WLAN Link On – Unit is synchronized or associated with an AP
Off – Unit is not synchronized or associated with an
AP
ETHR Ethernet activity On – Reception on Ethernet port
Off – No reception on Ethernet port
QLT Quality of reception
Q
LT
QLT
QLT
Q
LT
very low quality reception or
not synchronized with Access Point
less than -81 dBm
low quality reception
(usually enabling 1 Mbps traffic)
from -81 to -77 dBm
medium quality reception
(usually enabling 2 Mbps traffic)
from -77 to -65 dBm
high quality reception
(usually enabling 3 Mbps traffic)
greater than -65 dBm