User`s guide

Basic Installation
User’s Guide
2-4
BreezeNET PRO.11 Series
2.4 Connect the Unit to the Power Supply
The unit operates on a power input of 5VDC, (1200mA , 1500mA peak) supplied
by the power transformer included with the unit.
• Plug the output jack of the power transformer into the DC input socket on the
unit. This socket may be located on the rear or side panel of the unit.
• Connect the supplied power transformer to a power outlet - 110/ 220VAC.
2.5 Connect the Unit to the Ethernet Port
• Connect one end of a an Ethernet 10BaseT cable (not supplied) to the RJ-45
port on the rear panel of the unit (marked UTP).
• Connect the other end of the connector cable to the Ethernet outlet:
• When connecting an SA-10 or SA-40 to a PC, use a straight cable.
• When connecting an AP-10 or WB-10 to a LAN, use a straight cable.
• When connecting an AP-10 or WB-10 to a PC, use a crossed cable.
• When connecting an AP-10 to a WB-10, use a crossed cable.