User`s guide

Basic Installation
BreezeNET PRO.11 Series
2-1
User’s Guide
2. BASIC INSTALLATION
This chapter describes physical installation of the BreezeNET PRO.11 series units
described in Chapter 1, with the exception of the SA-PCR card. Installation of the
SA-PCR PRO.11 PC card is described in Chapter 4.
The BreezeNET PRO.11 series features plug-and-play operation, i.e., the unit starts
operating immediately after physical installation with a set of default operation
parameters. A local terminal can be connected to the unit to perform system-
specific parameter setting. The use of a local terminal and the configuration
parameters are described in Chapter 3. In addition, all products in the PRO.11 series
contain an SNMP agent and can be configured from a remote location via the
network. This is described in the Appendix.
2.1 Basic Installation Checklist
Standard installation involves the following steps:
• Check the packing list
• Position the unit and the antenna in the best location
• Connect the power supply to the unit
• Connect the Ethernet port to the unit
• Check unit functionality using the LED indicators
2.2 Check the Packing List
When you first open the package, verify that the unit is complete with the following
components:
• The unit, complete with two omni-directional antennas or RF connectors for
use with external antennas (D models).
• Quick Installation Guide/Card.
• 5V DC power supply transformer.