User`s guide

Appendix
BreezeNET PRO.11
9-9 User’s
Guide
9.2.6 Specifications for AMP 2440 Bi-Directional Power
Amplifier
General Specifications
Operating Range 2400-2483 MHz
Operating Mode Bi-directional, half-duplex.Senses RF carrier from
transmitter and automatically switches from receive
to transmit mode.
Connectors N-female
Indicators TX and RX LEDs on both the amplifier and the DC
bias injector
Lightning Protection Direct DC ground at antenna connector
DC Surge Protection 600 Watt TVS at 12 VDC input from transmission
cable
Transmitter Amplifier
Transmit Gain Up to 15 dB
Frequency Response +/-1 dB over operating range
Transmit Output Power
• AMP 2440-500 model: 500 mW
*
• AMP 2440-250 model: 250 mW
.
Transmit Input Power 3 mW minimum,
100mW maximum
(+3dBm required to cause TX mode)
Receiver Low Noise Amplifier (LNA)
Receive Gain 18 dB typical
Frequency Response +/-1 dB over operating range
Noise Figure 3.5 dB approximately
Third Order Intercept 20 dBm