User`s guide

SA-PCR PRO.11 PC Card Installation, Setup, and Management
User’s Guide
4-38
BreezeNET PRO.11 Series
4.9 Installing the SA-PCR Drivers in ODI Systems
The ODI driver supports Novell VLM and NETX clients, Novell TCPIP, Lantastic
v.6 (with ODINSUP), Microsoft Windows 3.11 (with ODINSUP).
The following files are supplied for the DOS ODI environment:
brzwlan.com ODI driver file, generic version
brzwlanf.com ODI driver file for Falcon 310 (supplied only on request)
brzwlan.ini Default configuration file
brzsetup.exe Site survey utility
net.cfg Sample ODI16 configuration file
Brzwlan.ins Installation information for Novell client (DOS and Windows)
1. The ODI driver gets its resources from the Card & Socket Services. Verify that
the PC you are using is installed with Card & Socket Services software.
2. Copy all files from the DOSODI directory on the driver to the NetWare client
directory. (In case you already have a NET.CFG file that you want to keep,
copy and paste the BRZWLAN section from the sample NET.CFG file supplied
by BreezeCOM, into your existing file.
3. In order to login to a NetWare server you should run the following files (make
sure that the NET.CFG and the BRZWLAN.INI files are located in the
directory from which you run the following files:
• LSL.COM (supplied by Novell)
• BRZWLAN.COM
• IPXODI.COM (supplied by Novell)
• VLM.EXE (supplied by Novell)
4. After running the BRZWLAN file, the yellow LED on the card should blink
several times and then remain lit.