User`s manual

BreezeNET DS.11 Series 48 User's Manual
16. Select ESSID from the Property list, and type in a value in the field. The ESSID can have
any value up to 31 hexadecimal characters, and should have the same value as the Access
Point (AP) in Infrastructure mode. In Ad-Hoc mode, all clients should share the same
ESSID.
17. Select Use Wep from the Property list, and choose 128 bit, 64 bit or Disabled from the
drop-down list. The WEP settings must match those of the Access Point.
NOTE: To use WEP in a network based on the BreezeNET AP-DS.11, 64-bit must be
selected.
18. After configuring the properties, click OK.
3.5 PC-DS.11 Driver Installation for Windows NT4.0
The following driver installation procedure is for the Windows NT operating system.
1. Physically install the PC-DS.11 or PCI-DS.11 card.
2. Switch on the PC and login as Administrator, then open the Control Panel and
double-click the Network icon.
3. From the Network dialog box, select the Adapters tab, and then click Add.
4. Click Have Disk.
5. Insert the driver disk and security key and then click OK.