User`s manual

PC-DS.11 & PCI-DS.11
User's Manual 47 BreezeNET DS.11 Series
11. Select Fragmentation Threshold from the Property list. The default value is 2432.
12. Select Network Type from the Property list, and choose Infrastructure, Ad-Hoc, or
802.11b Ad-Hoc from the drop-down list.
NOTE: Infrastructure mode allows a wireless adapter to communicate with a network using the
AP-DS.11, while Ad-Hoc and 802.11b Ad-Hoc mode allow wireless-to-wireless
communication. Ad-Hoc mode allows peer-to-peer communication with similar wireless
LAN products. The 802.11b Ad-Hoc allows peer-to-peer communication with all 802.11b
based wireless LAN products. Consult your System Administrator for information about
your network communication type.
13. Select Power Save Mode from the Property list and choose Disabled or Enabled from the
drop-down list.
NOTE: To allow uninterrupted data communication, choose Disabled as the value. Choosing
Enabled allows your notebook to enter Sleep mode. However, this may interrupt data
communication. Consult your System Administrator to find out the best setting for your
Network type.
14. Select Preamble Mode from the Property list and choose Long Tx Preamble from the
drop-down list as the default value.
15. Select RTS Threshold from the Property list. The default value is 2432.