User`s manual

BreezeNET DS.11 Series 46 User's Manual
Figure 23: BreezeNET Configuration – Channel
9. Select Authentication Algorithm from the Property list. The options shown in the value
list are Open System or Shared Key. The default value is Open System.
10. Select Channel from the Property list, and choose a value from the drop-down list. FCC
regulations require a value between 1 and 11 and ETSI requires a value between 1 and 13.
The default is Channel 6. For a list of frequencies see Regulatory Channel Frequencies
on page 25.
NOTE: The Channel setting is applicable only in Ad-hoc mode and is not relevant in
Infrastructure mode since the PC card automatically uses the same channel as the
AP.