User`s manual

AP-DS.11
User's Manual 27 BreezeNET DS.11 Series
NOTE: This parameter should only be changed by an experienced user. It may be set to
Short Preamble only if all the wireless stations served by the AP also support
Short Preamble.
• The Basic Rate parameter is used to define the maximum transmission rate of
the broadcasts and control packets. Available selections are 1-2 Mbps and
1-2-5.5-11 Mbps. In addition, you may enable/disable the data transmission
Auto Rate Fall Back option. The Access Point will increase the transmission
rate until it reaches the maximum rate within its defined range. The AP will
dynamically adapt its transmission rate to the quality of the wireless link. The
default selection is 1-2-5.5-11 (Mbps) with Auto Rate Fall Back enabled.
• The Antenna Diversity parameters allow the receiving and transmitting antenna
to be defined. The available selections are Antenna 1, Antenna 2 or Both. The
default for both Receive Antenna and Transmit Antenna is Both.
5. The IP Setting tab allows you to change the IP Address and IP Mask settings.