User`s manual

BreezeNET DS.11 Series 20 User's Manual
2.2 Configuring the AP-DS.11
The AP-DS.11 can be configured using one of the two configuration utilities provided
with the unit:
a) The USB Configuration Utility, running under Windows 98/2000/ME, connecting
to the Access Point via the USB port.
b) The SNMP Configuration Utility, running under Windows 98/2000/ME/NT,
connecting to the Access Point from anywhere in the network via either the
Ethernet or the wireless LAN.
NOTE: The USB configuration utility can be used with Windows 98/2000/ME only. It does not
support Windows NT. The installation process for the configuration utility includes the
installation of the USB drivers and installation of the configuration utility.
2.2.1 USB Configuration Utility
2.2.1.1 Installing the USB Drivers
To install the AP-DS.11 USB driver with Windows 98/2000/ME:
1. Insert the AP-DS.11 Access Point Driver and Utilities CD into the CD drive of the PC.
2. Plug the USB cable into the USB slots on the AP-DS.11 and the PC.
3. Windows 98/2000/ME will automatically detect the AP-DS.11 and prompt you to install