User`s manual

AP-DS.11
User's Manual 19 BreezeNET DS.11 Series
2.1.2.6 Antennas
Make sure that the antennas are extended upward (or downward) vertically in relation to
the floor.
2.1.3 Connecting the Access Point to the Power Supply
The AP-DS.11 operates on a power input of 5V DC supplied by the power transformer
included with the unit.
• Connect the power transformer’s DC cable to the POWER +5V power socket on
the unit. Use ONLY the power transformer supplied with the AP-DS.11.
• Connect the power transformer’s AC plug to a mains power outlet –
110/220VAC.
2.1.4 Connecting the Access Point to the Ethernet Port
• Connect one end of an Ethernet 10/100BaseT cable (straight cable, not supplied
with the unit) to the ETHERNET connection on the unit.
• Connect the other end of the cable to the Ethernet source outlet.