User`s guide
DS.11 Configuration Utility Main Window
BreezeNET DS.11 Configuration Utility 3 User’s Guide
Figure 1. DS.11 Configuration Utility Main Window (Station Control Tab)
2.1 Selecting Units
You can select a unit to manage in one of the following ways:
• Click the
button. All the current units IP addresses (under
the selected community) are displayed in the list box underneath the button.
Click on an address to select the corresponding unit for viewing and
configuration.
• For stations, which are located behind a router, type the unit's address in the
Locate Unit field and click
.
Control window containing
the IP address,
Community and Access
Rights selection area
Tabs area
Click here to
enlarge IP
display area