User`s guide

DS.11 Configuration Utility Main Window
User's Guide 2 BreezeNET DS.11 Configuration Utility
2. DS.11 CONFIGURATION UTILITY MAIN
WINDOW
• The Control Window section - In this section, you can perform the following:
⇒ View the DS.11 units that have been discovered by their IP address
⇒ Select the IP address of the unit you wish to manage
⇒ Assign unit IP addresses
⇒ Set the Configuration utility access rights
⇒ Set the SNMP Community information
If there are many units in the managed network, you can enlarge the list box by
clicking on the horizontal line above the list; click again to toggle back the
default display state. The list box also displays the Location of each unit, as set
in the Station Status dialog box (see Section 3.1).
• The Tabs Section - This section consists of several tabs, each containing
parameters required for the management of the selected unit; the number of
tabs displayed varies between the type of managed unit. The different tabs are
described in the following sections. When you switch between the tabs, the IP
Selection section with the selected unit address remains displayed.