User`s guide

General
BreezeNET DS.11 Configuration Utility 1 User’s Guide
1. GENERAL
The DS.11 Configuration utility is an SNMP-based (Simple Network Management
Protocol) utility that provides a consistent view of the wireless network.
The system administrator can use the DS.11 Configuration utility to control a large
number of DS.11 units from a single location. The configuration utility can be used
to manage BU-DS.11 and RB-DS.11 units:
Among the supported features:
• Assign radio channels for optimal cell operation
• Configure units with a specified IP address
• Set the SNMP Read/Write Community strings
• Verify the status of all units in the network
• Antenna selection and diversity setting
• Configuration of a wide range of operational parameters, including WLAN, IP
and Security parameters
• View Tx and Rx counters
• Obtain general information such as the Firmware version and system name