User`s guide

Utility Configuration Windows
BreezeNET DS.11 Configuration Utility 15 User’s Guide
• Range - Select the operative range of your WLAN or Wireless Link in the
drop down list.
• Channel - The method of channel selection varies, depending on the type of
unit.
For BU-DS.11 units, select the channel that the unit will use by selecting a
value (range: 1-14, depending on your regulatory domain) from the Channel
pulldown field. Refer to Table 3-1 on the next page for the list of
corresponding frequencies.
For RB-DS.11 units, there are two channel setting options: if you select the
Fixed Channel option by clicking the appropriate radio button, then the
RB-DS.11 will search for the BU-DS.11 unit on the selected channel (from the
Channel pulldown field) and synchronize with it. The channel you select must
match the channel selected in the BU-DS.11 unit at the other end of the link.
If you select the Scanning Mode option (by clicking the appropriate radio
button), you can specify preferred channels by clicking one or more of the
buttons displayed at the bottom of the window. In this mode, the RB-DS.11
will first search for the BU-DS.11 unit on the channel you select in the
Channel pulldown field and synchronize with it if the link is established. If the
RB-DS.11 does not find the BU-DS.11, it will scan and search for one of the
preferred channel frequencies you selected. If it does not find the BU-DS.11
on any of the preferred channels, it will continue to scan until it finds the
BU-DS.11 on one of the 14 channels.