User`s guide

Utility Configuration Windows
User's Guide 14 BreezeNET DS.11 Configuration Utility
Figure 11. WLAN Parameters Tab (RB Units)
• Regulatory Domain - This read only field displays the regulatory authorities
in the relevant country of use (e.g., Canada, ETS, FCC, Japan).
• Power - This read only field displays the current output power level of the
unit.
• ESSID - An ASCII string of up to 32 characters used to identify a WLAN that
prevents the unintentional merging of two co-located WLANs. It is essential
that the ESSID is set to the same value in all stations and Wireless Base
Stations in the extended WLAN. The ESSID field is case-sensitive.
• Maximum data rate - By default,
t
he unit adaptively selects the highest
possible rate for transmission. Under certain conditions (for range/speed trade-
off) you may decide not to use the higher rates. Possible values are 2, or 5.5 or
11 Mbps. The default value is 11 Mbps.
• Transmit diversity - Set the antenna diversity option, which can be Antenna
No. 1, No. 2, or both (default: both antennas).
Note:
In the present product release, antenna diversity is not supported;
therefore, always select Antenna No. 1.