User`s guide

Utility Configuration Windows
BreezeNET DS.11 Configuration Utility 11 User’s Guide
3.2 IP Parameters Tab
The IP parameters tab allows you to define or edit the IP parameters of units.
Figure 8. IP Parameters Tab
• IP Address - The IP address of the selected unit.
• Subnet mask -The Subnet mask of the selected unit.
• Default gateway - The default gateway of the selected unit.
• DHCP - Sets the way your system utilizes the Dynamic Host Configuration
Protocol (DHCP, used for automatic IP assignment).
⇒ Always - The system searches for a DHCP server each time the unit is
turned on.
⇒ Smart - This is the default value. The system searches for a DHCP
server only if no IP address was assigned. If an IP address was assigned
manually, the system will not search for a DHCP server.
⇒ Never - The system never searches for a DHCP server.