User`s guide

DS.11 Configuration Utility Main Window
User's Guide 6 BreezeNET DS.11 Configuration Utility
• Multiple Configuration - allows downloading configuration parameters to mode
than one unit simultaneously; refer to Section 2.7 for instructions on using this
feature.
• Trap Quick View - when set to this mode, the PC station (if set as the trap host
as described in Section) switches automatically to the Trap Monitor tab
(described in Section 3.9) when the Configuration utility is active.
2.6 Firmware Upgrade
This mode of operation allows upgrading the embedded software in managed units.
When you select this mode from the mode menu, the following dialog box is
displayed.
Figure 3. Firmware Upgrade
The list box on the left-hand side of the dialog box displays the managed units; it is
sorted sequentially by BU-DS.11 followed by RB-DS.11 units.
1. Select the units which you wish to upgrade from the list box. Use Shift-click
and/or Ctrl-click to select multiple units, or select multiple units by dragging
with the mouse.