User`s guide

DS.11 Configuration Utility Main Window
BreezeNET DS.11 Configuration Utility 5 User’s Guide
2.4 Application Control Buttons
All Configuration utility windows and Tab areas contain the following buttons.
Additional buttons, specific to certain windows, are explained when relevant.
•
– Closes the window without implementing any changes you made.
•
– Implements any changes you made.
•
– Refreshes the window with newly queried data the most recent
data from the unit.
•
– Minimizes the application into the icon, placed in the
Windows task bar (at the bottom of the Windows desktop). To restore the
application, click the
icon.
2.5 Configuration Utility Modes
There are several DS.11 Configuration utility modes of operation; these options are
chosen via the Options menu in the configuration utility main window (shown
below). The selected option(s) is indicated by a check mark next to the option in
the menu.
• Unit Configuration - this is the default mode; used for setting parameters as
detailed in this manual.
• Firmware Upgrade - allows upgrading the embedded software in managed
units; refer to Section 2.6 for instructions on using this feature.