User guide

Monitoring Your BreezeNET Network
5-27
Alvarion
the initiator stations network via a low-speed connection (e.g. a dial-up
modem connection).
Adjusting SNMP Polling Interval
The data displayed in the Remote tab refreshes at regular intervals that can vary
between 1 second and 5 minutes. Adjust the refresh rate by changing the SNMP
polling interval.
! Use a short interval (1 second) when you want to monitor remote statistics
on-line, e.g. in case of troubleshooting and/or when you have full bandwidth
access to the Base Station via the local network.
! Use a long interval (5 minutes) when you run remote statistics only for
background display purposes, in cases when you access the network of the
selected Base Station via a low-speed connection (for example a dial-up
modem connection).