User guide

5-22
BreezeNET DS.11b User’s Guide
Manual Version 1.0
Remote Link Test Window
The AP Manager remote link test enables you to investigate the radio link
between the Base Station of your choice (the “initiator station”) and a station
connected to the selected Base Station.
This station can be a wireless station connected to the selected Base Station.
The user-interface of the AP Manager Remote Link Test is very similar to the
Link Test of the Client Manager.
Starting the Remote Link Test
To display the remote statistics for the Base Station, you must first connect to
the target Base Station as described in Connecting to Base Stations.
1. Select the
System tab and click the Link Test button to display the window
pictured in Figure 5-19.
The fields in the top section of this window identify the “initiator station”
you selected when connecting to the Base Station.
Figure 5-19: Select a Link Test Partner
The middle section of the “Select Remote Link Partner for..." window
displays all wireless devices connected to the “initiator station”. The
following fields are visible:
! The fields
Station Name and Address these wireless devices are identified by
their station name and MAC address respectively.
This list may change as roaming mobile stations enter or exit the coverage
area of the selected Base Station.
! The
Interface field identifies the slots of the Base Station into which the
PC Card has been inserted.
NOTE:
The remote link test works only in combination with Base Stations.