User guide

Monitoring Your BreezeNET Network

5-13

Alvarion

" display all Base Stations belonging to that network that are within

range of your Client Manager station.Peer-to-Peer workgroup:

" a workgroup is created between stations with the setting Peer-to-

Peer.

Selecting another Wireless Network:

1. Click the

Selection tab on the Site Monitor window to display the window

pictured in Figure 5-16.

Figure 5-16: Select another Network to Monitor

The list of

Observed Networks on this tab will show:

! All networks that are operational within the range of your Client Manager

station.

! The type of network that might either be an:

" Infrastructure network

" Peer-to-Peer workgroup

! The number of Base Stations in the observed infrastructure network(s).

! The different radio channels used by the Base Stations.

2. (Optional) Click the

Scan Now button to refresh the list of observed

networks.

3. Click the network of your choice to return to the Site Monitor tab and

display the diagnostic indicators

For reasons of security, the site monitor will not display the network name, and

the MAC address or Base Station names of the neighboring network. You can

1. Although the Site Monitor Selection tab will allow you to determine the presence of a neighboring

Independent (Ad-Hoc) network, you can not select this type of networks for Site Monitor statistics. This is

because this feature requires the presence of

Base Stations, that are typically not available in

Independent networks (see also Wireless Configuration).