User guide

4-8
BreezeNET DS.11b User’s Guide
Manual Version 1.0
advised to make a back-up file of this configuration as described in Step 4 -
Create a Back-up of the Configuration.
More advanced parameter settings are discussed in Advanced Network
Configurations.
Step 4 - Create a Back-up of the
Configuration
At all times when you change the configuration of the Base Station, we
recommend that you create a back-up file of the configuration. You can use this
back-up to quickly restore the Base Station configuration in situations where:
! Your Base Station goes out of service.
! You would like to recreate the original configuration of the Base Station that
you had to replace (for example following a repair).
! When you need to perform a forced reload as described in
Appendix C: Forced Reload Procedure.
To create a back-up file proceed as follows:
1. Start the AP Manager program.
2. Select the Base Station you want to create a backup of.
3. From the Base Station menu select
Download Config File.
4. When prompted for a name, enter a name that allows you to easily recognize
the relationship between the file name and the Base Station.
5. Record the filename and the location where the Base Station will be installed
on the “Base Station Configuration Record” in Appendix A: Start Up
Configuration on page A-1.
To install and configure other Base Stations, refer back to Step 1 - Installing the
Base Station (page 4-5).