User guide

Basic Network Configuration
4-7
Alvarion
fine with its factory-set values, changing the BreezeNET parameters to unique
values will differentiate your network from possible neighboring networks.
1. Select the tab
Wireless Interfaces (see Figure 4-12).
Figure 4-12: AP Manager Wireless Interfaces tab
2. Enter the identification designator in the field
Network Name for the service
type that this interface should use:
The network name can be any alphanumeric string from 1 to 32 characters
in the range of “a” to “z”, “A” to “Z” and “0” to “9”.
The network name should be the same for all wireless network interfaces
that will service wireless stations that belong to the network.
The network name distinguishes your Base Stations from Base Stations that
belong to a neighboring network.
For information on other Interface parameters (like the
Advanced and
Security button), see Advanced Network Configurations.
3. When finished changing parameters, click
OK to save the configuration to the
Base Station and to return to the main AP Manager window.
At this stage, the IP address and other settings are stored in the volatile
memory of the Base Station.
This will complete the basic configuration of your Base Station. This basic
configuration will work efficiently in most networking situations. You are
NOTE:
If you save the configuration to the Base Station (by clicking the OK button), the Base
Station reboots automatically.