User guide

4-6
BreezeNET DS.11b User’s Guide
Manual Version 1.0
! To gain access to Base Stations on a different subnet or via a dial-up
connection, enter a specific IP address in the field
Enter the IP address
for a specific
Base Station.
Figure 4-11: Main AP Manager window
1. Click the
Edit button.
! If the Base Station that you select is identified by the factory-set IP
address 153.69.254.254, you will be prompted to change this IP
address.
" Enter a unique IP address for the Base Station in the field Base
Station
IP Address.
" Record the IP address on the Base Station Configuration
Record located in Appendix A: Start Up Configuration on
page A-1.
2. Enter the Read Write password and click
OK (default password is “public”).
! If the Base Station is found and if you entered the right passwords, a
new window appears with parameter tabs to change the configuration
(see Basic Network Configuration on page 4-1).
! If the Base Station is not found in the network and/or the configuration
is not read, or if the wrong password is entered, the message “Invalid
password” appears.
Click
OK to return to the main AP Manager window and try again.
You are now ready to change the Base Station configuration settings.
Step 3 - Set Network Name and Save
Configuration
When installing the BreezeNET network, you are advised to modify the default
settings of the wireless network interfaces. Although the Base Station will work