User guide

3-8
BreezeNET DS.11b User’s Guide
Manual Version 1.0
Installing BreezeNET Software
Client Manager
The Client Manager is a diagnostics tool that runs on wireless stations only. To
setup the LAN administrator station that is capable of running the Client
Manager program, the station must be equipped with the wireless client
adapter.
To install the Client Manager software, proceed as follows:
1. Insert the software CD-ROM that came with your Base Station station that
you have designated as the LAN administrator station.
If you downloaded the software from the web, please refer to the installation
instructions found on the web.
2. When the CD Browser automatically starts you can proceed with the next
step. If not:
! Click the
Start button on the Windows task bar, then select Run.
! Click the
Browse button in the Run window.
! Select the drive letter of your CD-ROM player in the Browse window,
then select the file “starter.exe”, and click the
Open button.
! Click the
OK button in the Run window. The CD Browser will start-up.
3. Click on Install a Product
4. Click on
Install Client Manager Software.
5. Follow the instructions on your screen. If not available yet, a special Alvarion
group in the Windows Programs menu will be created. This group will
provide access to the Client Manager.
Previously installed versions of the Client Manager program will
automatically be replaced.
During the installation, you will be prompted for a directory to install the
program files. The default directory for the Client Manager program is:
C:\Programs\Alvarion\Client Manager
Throughout this manual, we make references to a variety of files. Unless
otherwise specified, you will find these files in this default directory.
AP Manager
The AP Manager can be installed on both wireless and wired stations. To install
the program, you will need to select a station that is configured with: