User guide

GL-2
BreezeNET DS.11b User’s Guide
Manual Version 1.0
Bridge in
The total number of data packets arriving at the Base Station from the LAN segment
served by the selected wireless network interface.
This number reflects the sum of Unicast and Non-Unicast packets.
See also: AP Manager, Monitoring, Remote Statistics
Bridge in discards
The number of data packets not accepted by the Base Station.
See also: AP Manager, Monitoring, Remote Statistics
Bridge out
The number of data packets that have been forwarded by the Base Station to the
LAN segment served by the selected interface.
See also: AP Manager, Monitoring, Remote Statistics
Bridge Priority
A Bridge setup parameter that enables you to influence the choice of the ‘Root
Bridge’ and the ‘Designated Bridge’ as calculated by the Spanning Tree Algorithm.
A low numerical value of the Bridge Priority Parameter makes the bridge more likely
to become the designated bridge or Root Bridge (typically ‘0’). The recommended
value is ‘32768’. Valid values: 0-65000, Initial value: ‘32768’.
See also: AP Manager, Setup Bridge Parameters
Broadcast
Messages transmitted by a single station (typically a server) to all stations on the
network. This type of traffic is also referred to as Non-Unicast messages.
Bytes in
The number of bytes (octets) received at the Base Station from the LAN segment
served by the selected wireless network interface, including framing characters.
See also: AP Manager, Monitoring, Remote Statistics
Bytes out
The number of frames requested by higher level protocols that are to be transmitted
to a Non-Unicast address (i.e. a subnetwork broadcast or subnetwork Multicast
address). This number includes the frames that were discarded or not sent.
See also: AP Manager, Monitoring, Remote Statistics
C
Collisions
The number of packets that were not received properly as a result of a collision, due
to multiple stations trying to send packets over the medium simultaneously.
See also: AP Manager, Monitoring, Remote Statistics