User guide

Appendix B
B-5
Alvarion
Remote Reboot
To reboot the Base Station from a remote location:
1. Start the AP Manager program.
2. Select the target Base Station from the list or enter the IP address for a
specific Base Station.
3. Open the Base Station menu.
4. Select
Reboot Base Station.
The AP Manager program will now prompt you to enter the password
required to reboot the device.
5. Enter the Read/Write password and click
OK.
6. The Base Station will restart and run the start-up diagnostics.
After approximately 15 seconds, the Base Station will start bridging operation
using the configuration parameters as they were stored in the Base Station prior
to the reboot.
If you would like to display the configuration file or monitor the Base Station's
performance after a reboot, you may have to wait until the unit completes the
start-up diagnostics before you can access the Base Station again.