User guide

Appendix B:
Troubleshooting
Problems experienced in wireless LAN operation can be related to:
! Configuration mismatch
! Component failure
! Wired or wireless network problems.
Problem-solving Approach
To resolve a configuration mismatch you will need to compare the configuration
parameter settings of both Base Stations and all stations involved.
To determine a component failure, check the LED activity of the Base Station.
You can use the :LED Error Table on page B-2 to determine if a problem has a
hardware-related cause (component failure). This table may also provide help in
diagnosing and solving operational problems that might have other possible
causes.
When your Base Station appears to have stopped responding to normal bridging
requests, you may try to reboot the device as described under Rebooting Base
Stations.
In exceptional cases you may consider to do a forced reload procedure as
described in Appendix C: Forced Reload Procedure on page C-1.