User guide

7-6

BreezeNET DS.11b User’s Guide

Manual Version 1.0

1. Start the AP Manager and select the Base Station.

2. Click the

Edit button.

3. Select the

Access Control tab.

4. Click the

Edit button to display all MAC addresses that are currently

authorized as pictured in Figure 7-34.

By default, access control is set to

<All will be permitted>, i.e. there are

currently no access restrictions defined.

5. Use the following buttons to modify the MAC address table:

Add - to add MAC addresses one at a time. You can also use the

Comments field to enter a name or add a comment about the listed

MAC address.

Edit - to change entries in the table.

Delete - to remove MAC addresses one at a time.

Delete All - to remove all MAC addresses and disable access control.

Import File - to import an existing access control table.

Save File - to save the current access control to a file.

6. Repeat step 5 for all stations you want to authorize to send/receive data via

this Base Station.

Figure 7-34: Setup Access Control

7. Click the

Save file button to make a back-up copy of the access control table

file you just created (*.tbl).