User guide

7-4
BreezeNET DS.11b User’s Guide
Manual Version 1.0
" all non-BreezeNET stations with a “zero string ESSID” or “ANY” as
network name.
To close your network proceed as described below:
1. Start the AP Manager and select the Base Station.
2. Click
Edit to connect the Base Station.
3. Select the
Wireless Interfaces tab (see Figure 7-33).
4. Select the interface (PC Card slot A or B) of the network you wish to secure.
5. Click the
Security button to display the security properties.
6. Click the check box next to
Closed Wireless System.
7. Click
OK to confirm and close the Wireless Security Setup window.
Figure 7-33: Close the Wireless System
8. (Optional) Click the second interface to set the security parameters (return
to step 4).
9. Click
OK to save the new configuration to the Base Station and to return to
the main AP Manager window.
Your Base Station will automatically reboot and start bridging operation
again allowing access only to those users that have been configured with
exactly the same network name as identified in the setup of your Base
Station(s).
NOTE:
The Closed option is not compliant with the IEEE 802.11 standard for wireless LANs.