Programming instructions

A-6
BreezeNET DS.5800 System Manual
Manual Revision: 1.0
Configuration
How can the DS.5800 be configured or managed if the SNMP
Community name has been forgotten?
Press the reset button on the top panel with a paper clip. This will set
the read and write Community names to public and private,
respectively.
How can the DS.5800 unit be returned to factory default settings?
There are two ways. One way is to use the Default button on the Station
Control Tab in the DS.5800 Configuration Utility. The other is to press
and hold the reset button on the back of the unit while powering on the
unit. Remember that all settings including IP addresses will be lost
when setting defaults.