Programming instructions

3-22
BreezeNET DS.5800 System Manual
Manual Revision: 1.0
Debug Info
This option allows you to create a log file named BreezeLog.log. You can
send this log file to Alvarion technical support and receive help based on
the information recorded in this file.
To start recording, open the Debug Info menu item in the main menu
and select Start Log.
When you finish recording (usually after 24 hours) select Stop Log from
the Debug Info menu item and send the file to Alvarion technical
support representatives.
Resetting the SNMP
Community Strings
The SNMP Read/Write Community strings are an SNMP security feature
to restrict management access to authorized persons only.
To reset the SNMP community strings, insert a paper clip or another
suitable tool into the Reset button on the top panel of the unit while the
unit is operating. The community strings are reset to the default values,
private (Write) and public (Read).
Reloading Factory Default
Settings
To reset the unit to the factory defaults:
1. Disconnect the power cable from the indoor unit.
2. Insert a paper clip or another suitable tool into the Reset button on
the top panel of the unit (see Figure 2-7 on page 2-13). Keep the
Reset button pressed while inserting the power cable back into its
socket.