Programming instructions

BreezeCONFIG DS
3-13
Alvarion
For RB-DS.5800 units, there are two channel setting options: if you
select the Fixed Channel option by clicking the appropriate radio
button, then the RB-DS.5800 will search for the BU-DS.5800 unit
on the selected channel (from the Channel pull down field) and
synchronize with it. The channel you select must match the channel
selected in the BU-DS.5800 unit at the other end of the link.
If you select the Scanning Mode option (by selecting the appropriate
radio button), you can specify preferred channels by clicking one or
more of the buttons displayed at the bottom of the window. In this
mode, the RB-DS.5800 will first search for the BU-DS.5800 unit on
the channel you select in the Channel pull down field and
synchronize with it if the link is established. If the RB-DS.5800 does
not find the BU-DS.5800, it will scan and search for one of the
preferred channel frequencies you selected. If it does not find the
BU-DS.5800 on any of the preferred channels, it will continue to
scan until it finds the BU-DS.5800 on one of the channels permitted
according to the regulatory domain.
Table 3-1 describes the channels used by the DS.5800, the default
channel, the maximum output power and the default output power.
Table 3-1: Regulatory Domains Specifications
Regulatory
Domain
Lowest
Channel
Highest
Channel
Default
Channel
Max.
Output
Power
Default
Output
Power
FCC 5.8 1141424 24