Programming instructions

3-8
BreezeNET DS.5800 System Manual
Manual Revision: 1.0
Figure 3-4: Networking Parameters Tab
!
IP Address - The IP address of the selected unit.
! Subnet mask - The Subnet mask of the selected unit.
! Default gateway - The default gateway of the selected unit.
! DHCP - Sets the way your system utilizes the Dynamic Host
Configuration Protocol (DHCP, used for automatic IP assignment).
" Always - The system searches for a DHCP server each time
the unit is turned on.
" Smart - The system searches for a DHCP server only if no IP
address was assigned. If an IP address was assigned
manually, the system will not search for a DHCP server.
" Never - The system never searches for a DHCP server.
The default value is Smart.
SNMP Parameters Tab
The SNMP parameters tab allows you to define or edit the SNMP
community strings and the SNMP-related parameters.
NOTE:
When the unit is configured to use a DHCP server and none exists, the unit will assign itself
an automatic class B address in the range 169.254.X.X; this can be used with Auto
Discovery when the MAC address is not available.