Programming instructions

BreezeCONFIG DS
3-5
Alvarion
Figure 3-1: BreezeCONFIG DS Main Window (Station Control Tab)
The Control Window
Selecting Units
You can select a unit to manage in one of the following ways:
! Click the Network Autodiscovery button. All the IP addresses of
units in the same domain but not hidden behind a router (under the
selected community) are displayed in the list box underneath the
button. Click on an address to select the corresponding unit for
viewing and configuration.
! Type the unit's IP address in the Locate Unit field (for stations which
are located behind a router) and click . This will add the unit
information to the selection list.
Setting the SNMP Community String
Type the known Read/Write Community string in the Community field
(the default string is public for read and private for read/write) and click
the button to confirm.