Programming instructions

Installation
2-9
Alvarion
Installing the Outdoor Unit
The outdoor unit can be secured to the pole using one of the following
options:
! Special brackets sets (supplied with each unit). There are two pairs
of screw holes on the units, allowing the use of the brackets with
various pole widths.
! U-bolts - size A (inner installation holes, up to 2" pole).
! U-bolt - size B (outside installation holes, up to 3" pole).
! Metal bands (9/16” wide, minimum 12” long).
Figure 2-2 shows the locations of the holes, grooves and screw holes on
the back of the unit.
Figure 2-3 illustrates the method of installing a unit on a pole using the
supplied brackets.
Figure 2-2: Holes/Grooves/Screw Holes
NOTE:
Make sure to install the unit with the bottom panel (the panel with the signal strength bar
and LEDs) facing downward.