Programming instructions

Installation
2-3
Alvarion
Installation Overview
1. Select appropriate locations for the outdoor unit, the antenna (if
using an external antenna) and the Indoor unit.
2. Mount the outdoor unit. If using an external antenna mount the
antenna and connect it to the outdoor unit.
3. Connect a ground cable from the outdoor unit to an appropriate
grounding point.
4. Connect the Indoor-to-Outdoor cable to the outdoor unit and route it
to the location selected for the indoor unit. Refer to Appendix B for
instructions on preparing the Indoor-to-Outdoor cable.
5. Mount the indoor unit. Connect the Indoor-to-Outdoor cable to the
indoor unit’s Radio port.
6. Connect the indoor unit’s Ethernet port to the user’s network using
an Ethernet cable.
7. Configure the unit’s parameters.
8. Align the antenna and verify connectivity with any other units.
NOTE:
The indoor unit should be connected to the power source only after it has been connected
to the outdoor unit.