User`s guide

BreezeNET DS.11 Series User’s Guide
3-30
Firmware Upgrade Mode
This mode enables the embedded software in managed units
to be upgraded. When you select this mode from the Options
menu, the following window is displayed.
Figure 3-14: Firmware Upgrade Mode dialog box
NOTE:
The Configuration utility does not resolve the topology of the cell.
Therefore, firmware upgrades should be made from the central point
where the BUs are located.
The list box on the left-hand side of the dialog box displays
the managed units; it is sorted sequentially by BU-DS.11
followed by RB-DS.11 units.