User`s guide

BreezeNET DS.11 Series User’s Guide
3-26
♦ Shared Key: Only stations using a shared key encryption
are allowed to associate.
The default authentication algorithm is Open System.
If you select the Shared Key algorithm, set the following
parameters:
♦ Default Key ID – Sets the key for encryption.
♦ WEP Key – Defines the encryption keys used. Define
each key by clicking the appropriate WEP Key row and
entering ten hexadecimal characters (five sets of two
characters each) for each of the four keys. After clicking
Apply, the WEP Key values are displayed as zeros for
security reasons.
The default WEP key is the first key.
NOTE:
All units in the same cell should use the same key.