User`s guide

BreezeNET DS.11 Series User’s Guide
3-18
When you click the Reset Counters button, these counters
are actually reset (unlike the other counters which are only
reset on screen).
 Tx Success: The number of data and
management frames (except to beacons and
multicasts) that were transmitted and
acknowledged by the intended recipient.
 Tx Fail: The number of data and management
frames (except to beacons and multicasts) that
were transmitted without being acknowledged by
the intended recipient.
 Tx Fail (%) – The percentage of data and
management frames (except to beacons and
multicasts) that were transmitted without being
acknowledged by the intended recipient,
calculated as follows:
100*T x Fail / (Tx Success x Tx Fail)
♦ Resetting Counters
You can reset the counters displayed in the Counters tab by
clicking the Reset Counters button. All displayed values are
reset to display zero.
Note that this action does not reset the counters stored in
the actual unit, but just resets the values displayed in the
screen (an exception to this are the Link Counters).
Therefore, if you exit the Counters tab, after performing a
reset and reopen it at a later time the counter values are
displayed to reflect the values stored in the unit. To reset the
counters in the unit, turn off the unit and then turn it back
on.