User`s guide

BreezeNET DS.11 Series User’s Guide
3-8
Assigning and Editing IP Addresses
Manually (based on MAC addresses)
This section describes how to manually input or modify the
IP address of the selected unit.
1. Click the Set IP button. The Set IP dialog box appears.
Figure 3-2: The Set IP Dialog Box
2. Type the parameters in the appropriate fields and click
OK; the MAC address is shown on the bottom label of
the Indoor and Outdoor units. A message box is
displayed notifying you when the changes are to take
affect. This feature can be used only if the DS.11
Configuration Utility is on the same Ethernet segment
as the unit and not behind the router.
NOTE:
In order to see the unit after assigning the IP address, the PC with the
Configuration utility should be on the same IP subnet as the assigned IP
address.
Units receive auto IP address if there is no DHCP server and the unit is
configured to work in the Smart mode. The IP address will be chosen
randomly in the 169.254.x.x range with a subnet mask of 255.255.0.0.