User`s guide

The DS.11 Configuration Utility
3-7
Control Window
The following sections describe how to work with the Control
Window.
Selecting Units
You can select a unit to manage in one of the following ways:
♦ Click the Network Autodiscovery button. All the IP
addresses of units in the same domain but not hidden
behind a router (under the selected community) are
displayed in the list box underneath the button. Click on
an address to select the corresponding unit for viewing
and configuration.
♦ Type the unit's IP address in the Locate Unit field (for
stations which are located behind a router) and click
.
This will add the unit information to the selection list.
Setting the SNMP Community String
Type the known Read/Write Community string in the
Community field (the default string is public for read and
private for read/write) and click the
button to confirm.