User`s guide

BreezeNET DS.11 Series User’s Guide
3-4
Configuration Utility Modes
There are several DS.11 Configuration Utility modes of
operation; these options are selected via the Mode menu in
the configuration utility main window (shown below). The
selected mode(s) is indicated by a check mark in the menu.
♦ Unit configuration: This is the default mode and is used
for setting parameters as detailed in this manual.
♦ Firmware upgrade: Used for upgrading the embedded
software in managed units; refer to Firmware Upgrade
Mode, on page 3-30 for instructions on using this
feature.
♦ Multiple configuration: Used for setting configuration
parameters for more than one unit simultaneously; refer
to Multiple Unit Configuration Mode, on page 3-34, for
instructions on using this feature.
♦ Trap quick view: When set to this mode, the PC
switches automatically to the Trap Monitor tab when Unit
Configuration mode is selected.