User`s guide

Installation
2-23
Verifying Correct Operation of
the Outdoor Unit
To verify proper operation, check the LED indicators located
on the bottom panel of the outdoor unit.
Name Description Functionality
WLAN
Wireless Link Indicator Blinking Green – Data received or transmitted on
the wireless link. Blinking rate is slower when
there is less wireless traffic.
DC
Power
Self Test and Power
indication
Green – Power is available and self test passed.
Red – Self test failed. Firmware did not load
successfully.
ETH
Ethernet activity/
connectivity indication
OFF –Ethernet connectivity is OK.
No traffic activity detected on the port.
Blinking Green –Ethernet connectivity is OK,
with traffic on the port.
Red – No Ethernet connectivity. When this state
occurs, check the Ethernet cable and Indoor-to-
Outdoor cable connections.
RSSI
BAR
RB-DS.11: Received Signal Strength Indication
BU-DS.11: Number of associated RB-DS.11
units
Table 2-3: Outdoor Unit LEDs