User`s guide

BreezeNET DS.11 Series User’s Guide
2-20
Figure 2-6: Indoor Unit Top Panel
6. Connect the 10BaseT connector to the network. The
cable connection should be straight Ethernet if
connecting the Indoor unit to a Hub and a crossed cable
if connecting it directly to a PC Network Interface Card
(NIC).
NOTE:
The length of the Ethernet cable connecting the indoor unit to the user's
equipment, together with the length of the Indoor-to-Outdoor cable, should
not exceed 90 meters.
Configuring Parameters
Before aligning the antenna, certain key parameters must be
configured to enable connectivity with linked units.
See Unit Configuration Mode on page 3-5 for more
information.